|
WOLFCOM LE-8008A DVR Card
This page covers Step by step
video instructions on how to properly install and uninstall our DVR card
and software as well as feature set up, Trouble Shooting, Software and
Drivers Download,
|
LE-8008A Download Software,
Manual, and Drivers
Here |
DOWNLOAD |
BEFORE YOU BEGIN:
1. You'll need to make sure your pc meets the
minimum specification
2. Make sure you have an an External ATI graphics Card
already installed
3. If you are
installing this DVR card onto Windows XP service pack 2 read this first
4. If at anytime
Windows Security Alert pops up Please remember to choose Unblock
Once you are done completing
the 4 steps above. Please click on the video below
8
CHANNEL DVR CARD (LE-8008a) MINIMUM SYSTEM REQUIREMENTS:
Processor: Pentium 4 1.8
- 3.0GHz CPU.
Will not
work with AMD, duo/quad core or
hyper threading
Memory: 1 gig DDR
System RAM or higher
Video Card: ATI Radeon at
256MB DDR for 8 channels
(512MB DDR for 16 channels, 1gig DDR for 32 channels)
is
required.
Will
not
work
built-in or intergraded video cards
Hard Drive: 160GB
for 8 channels
(250GB
for 16 channels, 320GB for 32 channels)
Operating System:
Microsoft
Windows XP SP2,
Windows 2000 Professional (It will not work on SP3, Please make sure
that you are not running SP3)
| Please select the statement that best fits your
issue |
Click on Yes Or No |
| I am installing the DVR
card and software for the first time? |
Yes |
No |
| I have already installed the DVR card and
software But it does not work |
|
|
| Everything works but I don't know how to set the
motion detect to work |
|
|
| I can see video on only a few channels but not
on all of them |
|
|
| I cannot see the DVR cameras from another remote
computer |
|
|
| I can see the software interface but I cannot
see Video |
|
|
If
your computer operating system is 'Microsoft
Windows XP', You might see the security
alert the first time you run our DVR Software or when you try to run the
Client Software on a remote PC at first time.
Windows XP will pop-up : Security Alert,
Please choose 'Unblock
this program'
Please choose "Unblock this program"
otherwise , the client program will show '"Log-in
failure"
if You are on remote PC and you can't log in with our
client software please check & setup windows XP
firewall as below:
you can choose to turn off your Firewall....
Or click on the "Exceptions" Tab an check the boxes marked
'SVDVR', 'ClientMain'
, 'http' and click ok.
If you are an existing dealer/distributor & would
like to see a price list and know your user name and password,
click here to access our price list
If you would like to become a
Dealer or Distributor
Please call our "New Accounts Department" at
323-962-1061 or 1-800-282-1351 and select option #2
from the menu
|
