How does TapLock work?         

Just use your finger to "tap" your personal code on the car's windshield and the doors unlock instantly!  Simple!

In the next 60 minutes, 546 people will lock their keys in the car.*

We've all done it: Locked our keys in the car. Until now, the only answer was an embarrassing call home for our spare set, an expensive visit from the locksmith, or that wait for the friendly auto club to arrive.

Now, instead of tapping your foot while waiting for rescue, just tap your finger on the TapLock™ and you're in! TapLock™ ends those countless lost hours and dollars with its patent-pending, unique "Finger-Tap" Vehicle Entrysm System.

What is TapLock™?
TapLock is an electronic device designed for keyless entry into any vehicle equipped with electric locks or an automatic trunk/hatch release.

How Does TapLock™ Work?
Just tap your personal code onto the windshield. TapLock senses your taps and compares them to the code you've stored. When there is an exact match, a signal is sent to the vehicle's door "up-lock" switch or trunk/hatch release. The doors or trunk unlock instantly!

Your personal code can consist of up to ten sets of ten taps for millions of possible combinations.

Easily programmed personal code   Easily-seen LED flashes with each tap   Simple verification of your code   Permanent memory holds code   Operates even if vehicle is running (LED normally disabled with key "on".)   All components located safely and securely inside your vehicle.   Millions of codes possible!

Benefits of TapLock

Never get locked out again!   Never have to carry keys or remotes   Enjoy complete freedom! Go swimming, hiking, boating, running, playing any sport, shopping or simply taking the kids to the park!   Enjoy the security of knowing that only you know your TapLock code.   Provides instant emergency access to pets or children locked in vehicle.

*According to 1999 AAA statistics of 1998 service calls in North America.

Just Tap your personal security code (up to 10-sets of 10-taps) onto the windshield then
TapLock™ Gets You In.
When the tiny capsule containing a microphone mounted on the inside of the window senses the taps and compares them to the your stored personal code and if there's a match, the power door locks open and TapLock™ Gets You In.
All components of the TapLock™ are located inside the vehicle so there's nothing to carry. TapLock™ is always ready to receive your secret code and Get You In.

Operation:
Wake-up TapLock™ with three taps on the windshield.
The Red LED flashes to show it's "Ready".
Now tap-out your preset personal code.

When the tiny capsule containing a microphone mounted on the inside of the window senses the taps and compares them to the your stored personal code and if there's a match, TapLock™ sends power to the up lock switch to activate door locks and YOUR IN.

May also open trunk if you set it up that way.



Controller is mounted in side the vehicle and wired into the electrical system to control the
actuators in the lock system to Get You In.

>

Programming:
Change your code as often as you like.
Press the Receiver button twice. The Red LED flashes that it's ready to receive your new code.

Just Tap your personal security code
(up to 10-sets of 10-taps)
Directly onto the Receiver Module / windshield.

Press the Receiver button twice again and your code is locked in.
The code you entered is flashed back to verify.
Only when you change the code.
You’re Done !